Kavan RC GO-10S13MG Digital Servo
The Kavan GO-10S13MG high speed programmable digital pico servo 13g with titanium gear and input voltage range 4.8-6.0V, 2xBB, ideal for small model aircraft, 1:16-1:24 RC cars, 400-450 size helis etc. Torque 1.6kg.cm, speed 0.09s/60° at 4.8V, torque 2.0kg.cm, speed 0.08s/60° at 6.0V. Aluminium middle case heatsink for perfect cooling under high load.
High speed programmable digital pico servo with titanium gear and double BB-ed output shaft for small RC model planes, 1:16-1:24 RC cars, 400-450 size helicopters etc. Plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-10S13MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
- Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
- Servo Neutral: Servo neutral (centre) position setting.
- Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
- PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
- Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
- Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
- Reverse: Reverses the servo movement direction.
- Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
- SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
- Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
- (a) Release: No fail-safe protection.
- (b) Keep Position: Keeps the position corresponding to the last correct control signal.
- (c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
- Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
- Default: Restores the factory default setting of the connected servo.
Standard input voltage range 4.8-6.0 V (nominal).
25T/4.94 mm output shaft.
Tech Specs
Kavan GO-10S13MG Digital Servo Specifications
Servo Type: Micro Digital
Programmable: Yes
Thrust @ 4.8V: 1.6kg/cm
Thrust @ 6.0V: 2.0kg/cm
Speed @ 4.8V: 0.09s/60°.
Speed @ 6.0V: 0.08s/60°.
Servo Gears: Titanium
Ball Bearings: 2 x
High Voltage: No
Power Supply: 4.8-6.0V
Length: 22.8mm
Width: 12mm
Height: 29.4mm
Weight: 15grams
Output Shaft: 25 teeth/4.92mm
Intended for: Aircraft, Helicopters, On and Off road cars, Boats
Shipping Info
Shipping costs for Australian residents will be charged at checkout. If you are a customer from outside Australia please contact us for a postage cost and we will happy supply you with the international postage cost.