top of page
Kavan RC GO-1013MG Digital Servo

Kavan RC GO-1013MG Digital Servo

SKU: GO-1013MG

The Kavan GO-1013MG high torque programmable digital pico servo 13g with titanium gear and input voltage range 4.8-6.0V, 2xBB, ideal for small model aircraft, 1:14-1:24 RC cars, 400-450 size helis etc. Torque, speed 0.15s/60° at 4.8V, torque, speed 0.12s/60° at 6.0V. Aluminium middle case heatsink for perfect cooling under high load.


igh Torque programmable digital pico servo with titanium gear and double BB-ed output shaft for small RC model planes, 1:14-1:24 RC cars, 400-450 size helicopters etc. Plastic case with middle aluminium heatsink for perfect cooling under high load.

GO-1013MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.


Programmable Functions

  • Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
  • Servo Neutral: Servo neutral (centre) position setting.
  • Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
  • PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
  • Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
  • Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
  • Reverse: Reverses the servo movement direction.
  • Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
  • SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
  • Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
    • (a) Release: No fail-safe protection.
    • (b) Keep Position: Keeps the position corresponding to the last correct control signal.
    • (c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
  • Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
  • Default: Restores the factory default setting of the connected servo.


Standard input voltage range 4.8-6.0 V (nominal).

25T/4.94 mm output shaft.

  • Tech Specs

    Kavan GO-1013MG Digital Servo Specifications

    Servo Type:   Micro Digital

    Thrust @ 4.8V:  3kg/cm

    Thrust @ 6.0V:  3.8kg/cm

    Speed @ 4.8V: 0.15s/60st.

    Speed @ 6.0V: 0.12s/60st.

    Servo Gears: Titanium

    Ball Bearings: 2 x

    High Voltage: No

    Power Supply: 4.8-6.0V

    Length: 22.8mm

    Width: 12mm

    Height: 29.4mm

    Weight: 15grams

    Output Shaft: 25 teeth/4.92mm

    Intended for: Aircraft, Helicopters, On and Off road cars, Boats



  • Shipping Info

    Shipping costs for Australian residents will be charged at checkout. If you are a customer from outside Australia please contact us for a postage cost and we will happy supply you with the international postage cost. 

bottom of page