Kavan Pro 20g CA Thick

Kavan CA top-quality high-strength thick (cyanoacrylate) adhesive for model and general use. Supplied in a bottle with a clog-resistant application tip.
The thick, low-viscosity instant adhesive is ideal for bonding absorbent and non-absorbent materials that adhere well together. Bonds wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
 
Typical application method: the adhesive is applied to one of the touching surfaces and the parts are immediately pushed together; some adjustment of the relative positions is possible for a short time before the adhesive cures.
 
Features
Colour: clear
Viscosity: 800–1200 mPa.s
Density: 1,04–1,06 g/cm³
Optimum application temperature: 23 °C
Curing time (depending on temperature and nature of materials to be bonded): e.g. nitrile rubber 4–7 s, stainless steel 15–25 s
Full cure: 24 h
Shear strength: 15–25 N/mm²
Operating temperature range: -10 °C to +40 °C
Max. temperature range: -40 °C to +85 °C
Optimum gap width between bonded parts: zero
The cured adhesive is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator/accelerator: KAV56.9983.EN KAVAN PRO activator CA spray 150ml, KAV56.9984.EN KAVAN PRO activator CA spray 200ml
 
Recommended adhesive/debonding agent: KAV56.9979.EN KAVAN CA adhesive 20g
 
Removing excess uncured adhesive: cloth or paper napkin moistened with acetone (if the bonded materials resist it).
 
Thinning the adhesive: if the instant adhesive thickens, this is a sign that it has already partially polymerised and lost its original properties - no "thinning" can bring it back. If you need a "thinner" instant glue, simply use a lower-viscosity type. The different types of KAVAN PRO instant adhesives can be mixed together to achieve optimum viscosity.
 
For use as a sealant, suitable fillers: microballoon filler KAV56.9980.EN KAVAN CA filler.
 
Suitable for bonding: softwood and hardwood, particleboard, plywood, metals, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres, many plastics (including EPP and EPO).
 
Not suitable for bonding: polystyrene foam, polyethylene, Teflon, silicone.
 
Storing: in a tightly closed container, in a cool, dry and dark place (at +2 °C to +10 °C). Do not expose to temperatures below +2 °C.
 
Shelf life: under proper storage conditions, a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.