top of page
Dura-Grit 1" Carbide Cutting/Shaping Wheel

Dura-Grit 1" Carbide Cutting/Shaping Wheel


Rapid Material Removal:  D.I.Y. & Power Carving Shaping Tool!

CW1 - Carbide Cutting / Shaping Wheel. 1” (25mm)

The CW1 cutting and shaping wheel has become a favourite tool amongst RC modellers and woodworkers alike.  The CW1 has grit on the edge and both faces of the wheel allowing a push and pull to create pockets bevels and hollows using the face of the wheel.  


  • Product Info


    1" Carbide cutting/shaping wheel for DIY, modelling and smaller work pieces in tight spaces.

    • Cuts, shapes and finished in one operation
    • Carbide grit on the edge and both faces. Can be pushed and pulled to create pockets and hollows.
    • 'Stroke" bevels and create hollows, using the face of the wheel.
    • Effortless cuts. Smooth sanded finishes.
    • Minimal to no chipping on finished surfaces, such as fibreglass and/or melamine.
    • Very strong. Won’t bend or shatter.
    • Grit won’t tear loose.
    • Mounted on an extra strong, steel mandrel (ESM)


    Carves and sands beautifully on the following materials:

    • Hard and soft woods
    • MDF, Oak & Pine molding
    • Fiberglass
    • Composites
    • Carbon Fibre
    • Laminates
    • ABS plumbing
    • Rigid and flex PVC piping
    • Rubber hose
    • Plastic garden hose
    • Engineered wood floor (up to 5/8” thick)
    • Laminate ‘click’ floor
    • Gourds
    • and more!
    • (Not recommended for use on metal)


    • Cut-off smaller planks and dowel and work in tight spaces.
    • 'Push / pull / grind' and create 'pockets and cavities' for RC aircraft nose cones, fuselages, ship hulls, gourds etc.
    • Create wiring and control rod slots in RC aircraft wings.
    • Trim RC car plastic bodies and carbon fibre rods
    • Make decorative slots in wood cabinates, boxes, grourds etc.
    • Trim wood/fibreglass/plastic/carbon-fibre and composites etc, up to 9.5mm thick (3/8").
    • and much more....

    Diameter: 1" (25mm)
    Extra Strength Mandrel: 1/8" (3mm)
    Grit Grades: Available in 80 and 120 grit

    Depth of Cut: 9mm (3/8")

    Kerf: 80 grit 2.00mm (0.08"); 120 grit 1.51mm (0.059")


  • Shipping Info

    Shipping costs for Australian residents will be charged at checkout. If you are a customer from outside Australia please contact us for a postage cost and we will happy supply you with the international postage cost. 

bottom of page